You'll want to place the hooks for the stand on top of the squares at either end of this line of symbols. Do this carefully, but firmly, to ensure that the hooks are properly attached to the PS5. ORIGINAL BRAND NEW PS5 CONTROLLER CONDUCTIVE FILM L R BUTTON FUNCTION BUTTON FLEX RIBBON CABLE REPLACEMENT PARTS Before you start attaching the stand, you'll want to rotate the stand's hook so it's north-west of the elevated section of the stand. See the picture below for a better idea of what position the hook should be in: Using a dedicated horizontal PS5 stand is a great way to add stability and airflow when you have your console sideways. These aftermarket stands utilize two pieces for resting the PS5 on its side while simultaneously propping up the console. Not only does it improve the look, it adds much more stability than the standard base provides. In addition, it allows for better ventilation and heat dissipation.

Finally, you'll want to tighten the screw using, ideally, a coin - we used a 10 pence - or something similar.

For those who want the cleanest appearance possible, a PS5 wall mount may be a great option. A wall mount is the best choice for those who want to suspend their console behind or next to their TV. Either way, you could choose to showcase the PS5 on the wall, or simply hide it from sight. For the vertical mount to work, you need to screw the base in. There’s no hooks on the bottom to give the base stability. But there’s a catch: you’ll have to remove the screw cap from the left side of the console. It’s the side where the power button is, or the power/eject/Blu-Ray drive if that’s a bit easier. Mobile tech, home tech. All the tech, basically. We’re always looking at the newest trends and products, as well as passing on opinions on the latest product launches and trends in the industry. Place the stand on the PlayStation 5’s underside, aligning the hole in the stand with the screw hole in the PS5’s base. Use a flathead screwdriver, or a penny, to secure the stand. But what if you want to stand the PS5 up vertically? After playing around with the configuration, you might find that the PS5’s base doesn’t sit quite right. There’s a good reason for that. Image: Kotaku Australia

If, like us, you prefer the PS5 in its vertical position, here’s how you attach the stand to support it in this configuration:The bottom of the stand has the same rubberized feet that you’re probably already used to. This keeps the console sturdy and movement-free when upright or on its side. Best of all, it works equally well with the disc and digital versions. In addition, installation is just as painless and straightforward as with the original stand. If you’re looking for a direct clone of the PS5 base and screw, XBERSTAR offers just that. If you have the space, then you'll most likely want to have the PS5 standing in a vertical position. While you can do this without the stand, it will help keep your PS5 safe, so we highly recommend using it. There are currently two types of fans for the ps5 console, one is NIDEC 17 fan blades, and other is NMB 23 fan blades. The other is Delta,Players can choose according to their needs.

When the PS5 is resting horizontally, the disc slot should be on the bottom (if it’s on top, your machine is upside down). Main storage is integrated to the motherboard, but expansion should be easy (once enabled by Sony) with off-the-shelf M.2 SSDs. We keep the lights on by showing you unobtrusive ads. If you enjoy our community, please consider whitelisting or becoming a contributor: Silent Hill: Ascension’s pricing explained ahead of Halloween premiere The interactive horror streaming series is free to experience, but you can pay to participate The cover for the screw hole snaps into place, and it’s very easy to remove it as long as you can get a fingernail under the edge.To attach the stand, you'll firstly want to take the screw out of the stand. You can easily do this by rotating the stand and, once you have the screw, make sure you put it somewhere safe. It also appears that these new models, which come in both digital and disc flavours, weigh about 300 grams less than the original PS5 consoles. At this time there isn’t much info out there about what is or isn’t in these consoles that can explain the difference in weight. It’s not just the new screw! Sony has been quiet about these changes and hasn’t released much public information about them. The hole cap was designed and modeled by me to be a perfect fit into the tiny hole on the PS5. I sent off a few test variations to be 3D printed to make sure the best design was chosen for you. These are made in the USA right in American Falls, Idaho. The bottom half of the PS5. On the right is the 4K Blu-ray drive. At the bottom, on the left side below the system fan, is the metal flap covering the storage expansion slot, which can accommodate M.2 SSDs. Flip the PS5 console onto its side, reconnect all the cables and switch your television on. You're ready to play a few next-gen games now that the console is positioned in a sturdy and horizontal format.

Look closely at the large PlayStation symbols — square, triangle, circle, X — and you’ll see that they’re engraved amid tiny embossed ones. Thanks to gamer (youtube account: PiotrulekPampulek) for providing the replacement fan effect video Sony built a special compartment for just this purpose into the underside of the stand. When you’re not using the screw, you can just snap it in there. Sony even thought of the fact that in the horizontal orientation, the screw hole would be visible on the left side of the PS5. So the chamber also holds a piece of plastic that you can use to plug the screw hole (which makes it even harder to notice the already inconspicuous hole). We started purchasing replacement parts from kasyn in 2006, from xbox to xboxonex, and we witnessed the growth of video console games together.!" Once you've disconnected the HDMI and power cables from the console, you're ready to begin. In its default vertical position, the PS5 base is held on by a single screw. You'll need a flathead screwdriver to unscrew the base, or if you aren't near your garage, you can always make do with a dime or a penny to get the job done. 2. Store the screw in the basePS5 Stand positions - How to attach the stand vertically or horizontally and find the screw for the PlayStation 5explained First, get the PS5 stand in your hand. Hold onto the small piece of plastic on the top-side of the stand with one hand. Next, firmly hold and turn the protruding hook with your right hand, and twist the stand. It’ll then open up a small compartment, exposing the mounting screw for attaching the base vertically.